sales@bowlandtrading.com+44 (0)1200 422 229
Main » SOLD
  Machine Type: SOLD
Sort By:


Nu Tool 5 Speed Pillar Drill, Model -6-A, Capacity 1/2" (13mm), Year 1987, Serial No033997, 570-2500RPM
Nu Tool 5 Speed Pillar Drill, Model -6-A, Capacity 1/2" (13mm), Year 1987, Serial No033997, 570-2500RPM, No2 Morse Taper, 11.5" Diameter Rise and Fall Table.

1 in stock


Q&S Qualters and Smith Pillar Drill, Model QDM625, No 2 Morse Taper.
Q&S Qualters and Smith Pillar Drill, Model QDM625, No 2 Morse Taper.11.5 x 11" Swivel Table, 300-2200RPM, Serial No 24T17596

1 in stock


Swager Powered with Rolls and Foot pedal, Turkish
Swager Powered with Rolls and Foot pedal, Turkish, 3 phase, E stop, Foot pedal and rolls. Serial Number plate for motor, states Turkish, so assume machine is. Appears same size as CMZ 7.

1 in stock


Cast Iron Table Windley Bros with Tee Slot 36 x 24 x30"
Cast Iron Table Windley Bros with Tee Slot 36 x 24 x30",

1 in stock


Surface Bed Plate on legs 5.85m x 1.52m Tee Slotted
Surface Bed Plate on legs 5.85m x 1.52m Tee Slotted
Cast Iron Tee Slotted Table, with fabricated section legs. Top is approx. 6" thick from Plano Mill

1 in stock


J Barrow Hope & Co 3Ft Manual Pyramid Bending Rolls, 3.5" Diameter Top Roll
J Barrow Hope & Co 3Ft Manual Pyramid Bending Rolls, 3.5" Diameter Top Roll

1 in stock


BATY R14 XL Profile Projector
BATY R14 XL Profile Projector, with BATY XLS -1000 2 axes DRO, and Absolute DRO on screen, serial number 7449, with (3) lenses.
Machine Located at the enduser Machine Shop, West Midlands, U.K., and available for immediate inspection and supply.
We can supply a price to load, deliver, and install, please contact for further info

1 in stock


SOLD Bridgeport Series 1 Turret Milling Machine SOLD
SOLD Bridgeport Series 1 Turret Milling Machine SOLD
Serial Number 369550282W
Fitted with Heidenhain 2 Axis DRO.
Machine Located at the enduser Machine Shop, West Midlands, U.K., and available for immediate inspection and supply.
We can supply a price to load, deliver, and install, please contact for further info

1 in stock


Magnaflux MAG40HD Magnetic Crack Detector
Magnaflux MAG40HD Magnetic Crack Detector . Serial Number 19970803, with manuals.
Machine Located at the enduser Machine Shop, West Midlands, U.K., and available for immediate inspection and supply.
We can supply a price to load, deliver, and install, please contact for further info

1 in stock


Edel 182 Multistage (12) Turret Punch
Edel 182 Multistage (12) Turret Punch

1 in stock


Hand Bender By Robert Kelly and Sons - Anvil Base Not Included
Hand Bender By Robert Kelly and Sons - Anvil Base Not Included

1 in stock


CMZ Powered Swager, Foot Pedal, UN 5R, Serial No 2004, Year 1995, Made in USA
CMZ Powered Swager, Foot Pedal, UN 5R, Serial No 2004, Year 1995, Made in USA

1 in stock


Landis 60 inches between centres Plain Cylindrical Grinder
Landis 60 inches between centres Plain Cylindrical Grinder

1 in stock


SNOW Vertical Spindle Surface Grinder
SNOW Vertical Spindle Surface Grinder , 1m x 350mm magnetic chuck, wheel dia 350 x 50mm, with over head wheel dresser.
Our Ref 104490

1 in stock


Manual Hyd Press
Manual Hyd Press

1 in stock


Colchester Mascot 1600 Gap Bed Centre Lathe, 60" Between Centres, Quick Change Toolpost, Tailstock, Coolant
Colchester Mascot 1600 Gap Bed Centre Lathe, 60" Between Centres, Quick Change Toolpost, Tailstock, Coolant, Fitted With 3 Jaw Chuck.

1 in stock


Gate Profitdrill, 54 inch Arm length, 4 M.T. spindle
Gate Profitdrill, 54 inch Arm length, 4 M.T. spindle,
50 - 2240rpm, coolant brake Box table and Vice

1 in stock


Pollard Corona Drill Model 15 AX, Geared Head Drill


1 in stock


Churchill Cylindrical grinder, capacity; 22ft 6 inch between centres
Churchill Cylindrical grinder, capacity; 22ft 6 inch between centres and 24 inch swing over bed, serial number 11165. year of manufacture Circa 1950 (Nineteen Fifty). Newall B60 DRO on infeed, variable speed control to wheel head, table mounted wheel dresser, currently fitted with 26 inch dia x 3 inch, will accept 30 inch dia. nax spindle speeds 754 RPM, (5) Steady rests. wheel head will accept chuck. coolant in casting. approx weight 27,000 kgs.

1 in stock


Webster and Bennet 36” vertical borer 54.7 - 300rpm
Webster and Bennet 36” vertical borer 54.7 - 300rpm

1 in stock


Round Engineers Table 29” Diameter
Round Engineers Table 29” Diameter

1 in stock


Cast Iron Table various sizes in stock
Cast Iron Table various sizes in stock;
10 ft x 4 ft shown in image.

1 in stock


Binns & Berry TBT707 Gap Bed Centre Lathe
Binns & Berry TBT707 Gap Bed Centre Lathe
Swing Over Bed 36” (900mm)
Distance Between Centres 15ft (4500mm)
Double gap Piece
17.5” 4 jaw chuck
22” over cross slide
54” swing in double gap
12 – 600rpm
3 point steady
Screw Cutting

1 in stock


Cyklop WRAPPER & Strapping Machine (2005) Siemens Simatic OP3 Control
Cyklop WRAPPER & Strapping Machine (2005) Siemens Simatic OP3 Control
Model:MP 112 LV, GL215, S7
Serial Number: 01137604
3 Phase, 415v
3.5kw

1 in stock


Miltek 2500 Bailer Model 509 (2004)
Miltek 2500 Bailer Model 509 (2004)
Sn. 42041463

1 in stock


Phoenix Bailer new 2008
Phoenix Bailer
Year 2008
Sn 6288

1 in stock


HSM V-Press 860 Eco Bailer New 2007
HSM V-Press 860 Eco Compactor
Serial Number 6148.124
280052105v
Year 2007

1 in stock


Brierley ZB25 Drill Point Grinder.
Brierley ZB25 Drill Point Grinder.

1 in stock


Mastra Gear Deburrer Model A1000/72 , 250mm 3 jaw chuck.
Mastra Gear Deburrer Model A1000/72 , 250mm 3 jaw chuck.
Loaded from Darwen, BB3 3DF.
Our Ref 104500

1 in stock


Lees Bradner Thread Milling Machine
Lees Bradner Thread Milling Machine
Approx 36 Inch Max distance between centres and 19 inch swing.
supplies with , steady, (2) index plates, collets, change gears.
Our Ref 104671
Loaded Darwen, BB3 3DF, United Kingdom.

1 in stock


CEA Echo 452 Mig/Mag Welder GA154/005, With DF104 Electronic Wire Feed Unit
CEA Echo 452 Mig/Mag Welder GA154/005, With DF104 Electronic Wire Feed Unit

1 in stock


Clarke 260TE Turbo Arc Welder, Torch and Clamp,
Clarke 260TE Turbo Arc Welder, Torch and Clamp

1 in stock


Gullco Auto-weld Automation Carriage - Rigid Track Straight Line Burner, (2) Track Length 96" and 92"
Gullco Auto-weld Automation Carriage - Rigid Track Straight Line Burner, (2) Track Length 96" and 92"
The KAT® Carriage Auto-Weld enables a wide variety of automated welding cycles that can be repeatedly performed along any plane. The advanced Auto-Weld control monitors, via distance travelled, and responds to limit switches mounted on the KAT
Info on similar product below:-
http://catalog.gullco.com/item/weld-automation/kat-welding-carriage-auto-weld-system/item-1051

1 in stock


Cast Iron Table 6 x 3 ft Ormerod
Cast Iron Table 6 x 3 ft Ormerod
Price £750.00 Plus VAT.
Loaded from Sheefield.

1 in stock


Anayak HVM3800 M CNC Bed Mill
Anayak HVM3800 M CNC Bed Mill
Bedmill. 3910mm x 1000mm table, 50BT Spindle, Heidenhain 426 Control, S/N M-970512, New 1997, Weight Approx 33,000 kgs

1 in stock


Rosler Wash Surface Finishing MODEL TAM 30/5, serial number 631
Rosler Wash Surface Finishing MODEL TAM 30/5, serial number 631, scroll type wash, with dryer. New 1998.

1 in stock


Rosler Wash Surface Finishing MODEL TAM 30/2, serial number 620
Rosler Wash Surface Finishing MODEL TAM 30/2, serial number 620, scroll type wash, with dryer. New 1998.

1 in stock


Edwards Truecut DD Guillotine 1250mm x 3.25mm
Edwards Truecut DD Guillotine 1250mm wide x 3.25mm, powered guillotine with backstop.

1 in stock


TOS BHU 32 A Cylindrical Grinder 1500mm between centres
TOS BHU 32 A Cylindrical Grinder 1500mm between centres, Serial number 0248605, New 1984.
Maximum ground diameter: 320 mm
Maximum ground diameter using steadies: 110 mm
Maximum length between centres: 1750 mm
Maximum ground taper 12 deg.

1 in stock


Cincinnati 3-500 Twin Grip Centreless Grinder.
Cincinnati 3-500 Twin Grip Centreless Grinder.
Through Feed machine, with hopper Feed/out feed system.
Serial Number 78-370277-05 New 1978, Built in Netherlands
Grinding Wheel Diameter Max 610mm, Min 405mm
Grinding Wheel Width Max 510mm, Hole Diameter 304.8mm.
Regulating Wheel Diameter Max - 355mm, Min 260mm
Regulating Wheel Width Max 510mm, Hole Diameter 152.4mm
Speeds.
Regulating Wheel No of speeds, Infinitely Variable Low 12-59RPM, High 59-315RPM
Grinding Wheel Speed With 610mm Diameter Wheel 32m/sec

1 in stock


Lilian Model 5VH, Year 2000, Table 10 x 54", 40 Int Spindle, Acu Rite 3 Axis CNC Control
Lilian Model 5VH, Year 2000, Table 10 x 54", 40 Int Spindle, Acu Rite (MP2 Console Control) 3 Axis CNC Control (X/Y/Z - Quill), Power to knee (Up/Down), 130mm Spindle Stroke, Spindle Speeds 50-415 RPM Low and 410 - 3500 RPM High, Air Powered Drawbar, Box Ways, Year 2000.

1 in stock


Miyano Citizen BNJ 51SY5 7 Axis CNC Turning Centre with Fanuc Control
Miyano Citizen BNJ 51SY5 7 Axis CNC Turning Centre with Fanuc Control
Axis: X, Y, Z, C, X2, Z2, C2
Parts Conveyor/Catcher
H1 Run Time: 1671 Hours
H2 Run Time: 15591 Hours
12 Station Turret LHS
6 Station Turret RHS
Serial Number: DE5Y0082
Maufacturer Date: 2014.04
LNS Swarf Conveyor / Swarf Bin
Tooling Package include 8 Tools in Main Turret and 3 in 2nd Turret
Main Spindle (LHS): Collet Chuck LHS
Sub Spindle (RHS): 3 Jaw Chuck
Imeca BOSS 552 HD Type 32L 3.2m capacity Barfeeder (2014)
Sn. 02142GA03
Weight: 830kg
Machining Capacity
Standard Turning Length: SP1/SP2 100mm
Standard machining diameter SP1/SP2: ø51mm/ø42mm
Spindle
Spindle Speed Range SP1 50 - 5,000min-1, SP2 50 - 5,000min-1
Type of Collet Chuck SP1 H-S22, DIN177E
Type of Power Chuck SP2 6" Hollow
Turret
Type of Turret HD1 12st, HD2 6st.
Revolving Tools(Opt.)
Maximum Number of Revolving Tools HD1 Max.12, HD2 Max.4
Spindle Speed Range HD1 6,000min-1, HD2 3,000min-1
Maximum drilling diameter HD1 ø13mm, HD2 ø10mm
Maximum tapping diameter HD1 M12×1.75, HD2 M10×1.0
Slide Stroke
Turret Slide Stroke X1 axis 165mm, Z1 axis: 246mm, Y axis: ±40mm
Spindle Slide Stroke: X2 axis 85mm, Z2 axis 590mm
Motors
Spindle Motor SP1 Cs 15/11kw (15min./Cont.), SP2 Cs 7.5/5.5kw (15min./Cont.)
Machine Dimensions
Machine Height: 1,720mm
Floor Space: 2,780 × 1,510mm (Without Chip Conveyor)
Machine Weight: 5,500 kg

1 in stock


Cincinnati 3-500 Twin Grip Centreless Grinder.
Cincinnati 3-500 Twin Grip Centreless Grinder.
Through Feed machine, Equipped with SDS Balancing SB 5500 system, with hopper Feed/out feed system.
Serial Number 78-370281-11 New 1982, Built in Netherlands.
Grinding Wheel Diameter Max 610mm, Min 405mm
Grinding Wheel Width Max 510mm, Hole Diameter 304.8mm.
Regulating Wheel Diameter Max - 355mm, Min 260mm
Regulating Wheel Width Max 510mm, Hole Diameter 152.4mm
Speeds.
Regulating Wheel No of speeds, Infinitely Variable Low 12-59RPM, High 59-315RPM
Grinding Wheel Speed With 610mm Diameter Wheel 32m/sec

1 in stock


Miyano Citizen BNJ 51SY5 7 Axis CNC Turning Centre with Fanuc Control
Miyano Citizen BNJ 51SY5 7 Axis CNC Turning Centre with Fanuc Control
Axis: X, Y, Z, C, X2, Z2, C2
Parts Conveyor/Catcher
H1 Run Time: 15037 Hours
H2 Run Time: 15137 Hours
12 Station Turret LHS
6 Station Turret RHS
Serial Number: DE5Y0083
Manufacturer Date: 2014.04
LNS Swarf Conveyor / Swarf Bin
Tooling Package include 7 Tools in Main Turret and 3 in 2nd Turret
Main Spindle (LHS): Collet Chuck
Sub Spindle: (RHS) 3 Jaw Chuck
Imeca BOSS 552 HD Type 32L 4m Barfeeder (2014)
Sn. 621428GA04
Weight: 830kg
Machining Capacity
Standard Turning Length: SP1/SP2 100mm
Standard machining diameter SP1/SP2: ø51mm/ø42mm
Spindle
Spindle Speed Range SP1 50 - 5,000min-1, SP2 50 - 5,000min-1
Type of Collet Chuck SP1 H-S22, DIN177E
Type of Power Chuck SP2 6" Hollow
Turret
Type of Turret HD1 12st, HD2 6st.
Revolving Tools(Opt.)
Maximum Number of Revolving Tools HD1 Max.12, HD2 Max.4
Spindle Speed Range HD1 6,000min-1, HD2 3,000min-1
Maximum drilling diameter HD1 ø13mm, HD2 ø10mm
Maximum tapping diameter HD1 M12×1.75, HD2 M10×1.0
Slide Stroke
Turret Slide Stroke X1 axis 165mm, Z1 axis: 246mm, Y axis: ±40mm
Spindle Slide Stroke: X2 axis 85mm, Z2 axis 590mm
Motors
Spindle Motor SP1 Cs 15/11kw (15min./Cont.), SP2 Cs 7.5/5.5kw (15min./Cont.)
Machine Dimensions
Machine Height: 1,720mm
Floor Space: 2,780 × 1,510mm (Without Chip Conveyor)
Machine Weight: 5,500 kg

1 in stock


Lodi Model RTR 800 Microstatic Ring Grinder
Lodi Model RTR 800 Microstatic Ring Grinder
Serial Number 722, New 1986.

1 in stock


Workbench-Heavy Duty 1525mm x 700mm
Workbench-Heavy Duty 1525mm x 700mm •Heavy gauge steel construction. •All drawers are interchangeable with full width aluminium pull handles, 2mm protective anti-slip liners and all drawers have hemmed edges for safety & strength.
•All drawers have a 30 Kgs load capacity with key locks for all drawers together. •Independent push in “soft lock” for drawer stability. •Upto 1000 Kgs load capacity. •High quality rust & solvent resistant powder coat finish. •Four adjustable leveling legs. •Dimensions with casters (WxDxH) 1525 x 700 x 800 mm. Weight: 60 Kgs. Price includes assembly. Available for collection from Darwen or delivery. Price £260.00 ex VAT

1 in stock


Bowland 10 Drawer Tooling Cabinet
Bowland 10 Drawer Tooling Cabinet. •Extra heavy gauge steel construction; 1.2mm top & bottom covers, 1.0mm body and drawers. •Ball bearing drawer runners ensuring smooth sliding action. All drawers feature; • Full width aluminium pull handles. • 2mm protective anti slip liners. • Drawers & body have hemmed edges for safety & strength. • Are interchangeable. • Small drawers 25 Kgs load capacity. • Large drawers 30 Kgs load capacity •High quality rust & solvent resistant powder coat finish. •Key lock security for all drawers together (2 keys provided) •Independent push in "soft lock" for drawer stability. • (4) 125mm heavy duty wheels ( (2) fixed and (2) swivel with large toe-lock brake) •Dimensions with casters (WxDxH) 670 x 460 x 960 mm •Weight: 69 Kgs. Price includes assembly of unit, including wheels and handles, as shown in photos, either collect from our Lancashire works, or choose the nationwide delivery option. ..Price £750.00 INC VAT

1 in stock


Huron NU6 Universall Mill
Huron NU6 Universall Mill
2000mm x 460mm table, Newall DP7 2 axis, DRO, ISO 40 spindle

1 in stock


AXMINSTER Spindle Moulder Industrial Series, Model 501.
AXMINSTER Spindle Moulder Industrial Series, Model 501. Tilting, Fitted with Co-Matic AP48 power feed. With large amount of related tooling including cutter bodies. New 2014

1 in stock


ERP Compressor Model A50/250, Serial No 57122-20, Year 2014
ERP Compressor Model A50/250, Serial No 57122-20, Year 2014

1 in stock
Page 1 of 23First   Previous   [1]  2  3  4  5  6  7  8  9  10  Next   Last   
  

 

Login