Shop Online  Basket           Checkout  

Main » Lathes
  Machine Type: Lathes
Sort By:


Colchester Mascot 80" Gap Bed Centre Lathe
Colchester Mascot 80" Gap Bed Centre Lathe, equipped with, 2 Axis DRO, 10Hp Motor, 3 & 4 Jaw Chucks, face plate, tool holders.

1 in stock


Colchester Triumph 2500 VS lathe
Colchester Triumph 2500 VS lathe, 50" between centres, 2 Axis DRO, 3 and 4 jaw chucks, New 2003.

1 in stock


Colchester Triumph 2500 50 " Varispeed Gap Bed Centre Lathe
Colchester Triumph 2500 50 " Varispeed Gap Bed Centre Lathe with SONY LG 10 2 Axis DRO. 300 mm 4 jaw, 250mm 3 jaw Pratt Burnerd, (5) tool Holders, QCTP, Coolant,Lovo Lamp, Interlocking Chuck Guard, Nelsa Concertina Travelling Guard.
(2) Live Centres, (3) drill chuck, (1) Sleeves
Serial Number LVT500 MPJA /04522
Link To Video:-
https://youtu.be/ozFgZy470Yc

1 in stock


NEW ACRA FSML CENTRE LATHES 1440 IN STOCK NOW
SPECIFICATION
2 Axis DRO, 3 & 4 Jaw chucks, Fixed & Travelling Steadies, Face Plate, Tool Holders
Between Centres 1000mm
Swing over bed 356MM
Swing over cross side 220mm
Swing in gap 515mm
Width of bed 190mm
Spindle nose D1-4 CAMLOCK
Spindle bore 38mm
Spindle speed 20-2000RPM
No. of spindle speeds 12 Steps
Travel of tailstock barrel 95mm
Weight 750kgs
Length 2000mm
Width 770mm
Height 1550mm

1 in stock


Harrison M350 Gap Bed Lathe, 60" Between Centres, Serial No M350401393
Harrison M350 Gap Bed Lathe, 60" Between Centres, Serial No M350401393, Fitted With Quick Change Tool Post, Lo Vo Lamp, 40-2200RPM, Fixed Steady, Coolant and Splash Guard.Turning Diameter Over Bed (mm) 380mm, Turning Diameter Over Slide (mm) 240mm, Max. Swing-Dia. In Gap (mm) 580mm,

1 in stock


Dean Smith and Grace Type 17T Center Lathe 17 Swing Over Bed x 36" Between Centres,
Dean Smith and Grace Type 17T Center Lathe 17 Swing Over Bed x 36" Between Centres, Serial No 29385 Plain Bearing, Fitted with 12" Diameter 3 Jaw Chuck, Coolant, Lo Vo Lamp, Approx 65mm Spindle Bore Diameter, Taper Turning Attachment, Speeds Low - 6.9 / 5.3 / 3.9 - 36 / 28 / 7.8 - 16 / 12.2 / 7.8. Fast 13.8 / 10.7 / 7.8 / 72 / 56 / 41 - 32 / 24.5 / 18 - Multiply Speeds by 10 for high range.
Note head gearbox runs extremely quiet across the full range.

See Video Link:-
https://youtu.be/wXblYsy83_I

1 in stock


Colchester Student 6", 200m Diameter 3 Jaw Chuck, 24" Between Centres, Gap Bed, 3HP Main Motor, 13" Swing Over Bed
Colchester Student 6", 200m Diameter 3 Jaw Chuck, 24" Between Centres, Gap Bed, 3HP Main Motor, 13" Swing Over Bed

1 in stock


NEW ACRA FCL CENTRE LATHES 1550G IN STOCK NOW
SPECIFICATION
2 Axis DRO, 3 & 4 Jaw chucks, Fixed & Travelling Steadies, Face Plate, Tool Holders.
Height Of Centres 190mm
Between Centres 1250mm
Swing Over Bed 380mm
Width Of Bed 280mm
Swing Over Crosslide 238mm
Swing In Gap 610mm
Spindle Nose D1-6, MT no 6
Spindle Bore 56mm
Spindle Speed 22-2500 RPM
Motor 7.5HP
Weight 1450Kgs
Length 2580mm
Width 1120mm
Height 1745mm

1 in stock


NEW ACRA FCL CENTRE LATHES 21120G
SPECIFICATION 2160G / 2180G / 21120G
Height Of Centres 271mm / 271mm / 2/71mm
Between Centres 1500mm / 2000mm / 3000mm
Swing Over Bed 533mm / 533mm / 533mm
Width Of Bed 345mm / 345mm / 345mm
Swing Over Cross Slide 356mm / 356mm / 356mm
Swing In Gap 790mm / 790mm / 790mm
Spindle Nose D1-8, MT no.7 / D1-8, MT no.7 / D1-8, MT no.7
Spindle Bore 80mm / 80mm / 80mm
Spindle Speed 20-1600RPM / 20-1600RPM / 20-1600RPM
Motor 12.5HP / 12.5HP / 12.5HP
Weight 2650Kgs / 3000Kgs / 3700Kgs
Length 3035mm / 3535mm / 4535mm
Width 1120mm / 1120mm 1120mm
Height 1745mm / 1745mm / 1745mm

1 in stock


NEW ACRA FML CENTRE LATHE 1740G IN STOCK NOW
SPECIFICATION
2 Axis DRO, 3 & 4 Jaw chucks, Fixed & Travelling Steadies, Face Plate, Tool Holders
Height Of Centres 216mm
Between Centres 1000mm
Swing Over Bed 435mm
Swing In Gap 622mm
Width Of Bed 305mm
Spindle Nose D1-6
Spindle Bore 80mm
Spindle Speed 36-1800RPM
Motor 7.5HP
Weight 1700Kgs
Length 2400mm
Width 1120mm
Height 1745mm

1 in stock


Harrison M300 Centre Lathe With DRO
Harrison M 300 Gap Bed Centre Lathe, with 2 Axis Newall Topaz DRO, 3 jaw chuck, 4 jaw chuck, tool holders.

1 in stock


DSG Dean Smith Grace Type 17 x 120" Gap Bed Centre Lathe
Dean Smith Grace Type 17 x 120 Gap Bed Centre Lathe,
2.5" Spindle Bore, 12" Diameter 3 Jaw Chuck, Gap Bed, Coolant Pump. Roller Bearings , Serial No 34712-1-63

1 in stock


Harrison M300 Straight Bed Centre Lathe, 650mm Between Centres x 330mm Swing Over Bed, Quick Change Tool Post. See Video
Harrison M300 Straight Bed Centre Lathe, 650mm Between Centres x 330mm Swing Over Bed, Quick Change Tool Post, 150mm 3 Jaw Chuck, Faceplate, Travelling Steady, Drive Plate, 1/16 Backlash in X, 1/4 Turn Backlash in Y, 40-2500RPM, Lamp, Coolant, Runs Good slight noise in gears at mid-high range.

1 in stock


Harrison M300, 650mm Between Centres, 330mm Swing Over Bed, 8" Swing Over Saddle. - See Video
Harrison M300, Straight Bed Lathe 650mm Between Centres x 2330mm Swing Over Bed, Serial No 300092, 200mm Swing Over Saddle, Complete With Taper Turning, Quick Change Tool Post with 1 Tool, Interlocked Chuck Guard, 150mm Diameter 3 Jaw Chuck, 210mm Diameter 4 Jaw Chuck, 310mm Faceplate, 180mm Driveplate, Travelling Steady, Lamp. Concertina lead screw cover. Chuck Interlock Guard, Foot Brake, 1/4 Turn Backlash in Cross, Little/None in Long, Lamp OK

1 in stock


Harrison M300 Gap Bed Cenrer Lathe, 650mm Between Centres x 330mm Swing Over Bed, 2 Axis GT DRO - See Video
Harrison M300 Gap Bed Centre Lathe, 650mm Between Centres x 330mm Swing Over Bed, 2 Axis GT DRO, Quick Change Tool Post with 1 Tool, Travelling Steady, Lo Vo Lamp, 180mm Drive Plate, 310mm Faceplate, 200mm 4 Jaw Chuck (No Termination on rear), 150mm 3 Jaw Chuck (No Termination on Rear), Coolant, 1/8 Backlash in Cross, 1/16" Backlash in Long, Front Slide Marked but no step, Low Noise in One Gear Across the full range - machine fully functional,

1 in stock


Harrison M300 Gap Bed Centre Lathe, 2 Axis Sony DRO, 650mm Between Centres x 330mm Swing Over Bed - See Video
Harrison M300 Gap Bed Centre Lathe, Serial Number 152896, 650mm Between Centres, 330mm Swing Over Bed, Quick Change Tools Post with 1 Tool, Rear Tool Slide, 150mm Diameter 3 Jaw Chuck, 200mm Diameter 4 Jaw Chuck, 180mm Diameter Drive Plate, Interlocking chuck guard, Coolant, Rear Splash Guard, Sony Millman 2 Axis Digital Read Out - Magnescale LH30-2T01, Foot Brake

1 in stock


NEW ACRA FML CENTRE LATHE 1760G / 2040G / 2060G
SPECIFICATION 1760G / 2040G / 2060G
Height Of Centres 216mm / 254mm / 254mm
Between Centres 1500mm / 1000mm / 1500mm
Swing Over Bed 435mm / 508mm / 508mm
Swing In Gap 622mm / 698mm / 698mm
Width Of Bed 305mm
Spindle Nose D1-6
Spindle Bore 80mm
Spindle Speed 36-1800RPM
Motor 7.5HP
Weight 1850Kgs / 1850Kgs / 1900Kgs
Length 2900mm / 2400mm / 2900mm
Width 1120mm
Height 1745mm

1 in stock


NEW ACRA FCL CENTRE LATHES 1840G / 1860G / 1880G / 18120G
SPECIFICATION
Height Of Centres 230mm
Between Centres 1000mm / 1500mm / 2000mm / 3000mm
Swing Over Bed 460mm
Width Of Bed 345mm
Swing Over Crosslide 280mm
Swing In Gap 710mm
Spindle Nose D1-8, MT no.7
Spindle Bore 80mm
Spindle Speed 20-1600 RPM
Motor 10HP
Weight 2000Kgs / 2350kgs / 2700kgs / 3100kgs
Length 2535mm / 3035mm / 3535mm / 3535mm
Width 1120mm
Height 1745mm

1 in stock
Shop Online 

 

Login